In this example, I used yellow wire for one switch jack and red wire for the other switch jack.
It these move a lot the switch cable just gets in a tangle, and frustrates the child. Replace the battery into the toy. Your toy may have another style of internal switch that is different from the 4 pin push buttons we had here, but you can use the same process to determine the pins where you'll need to attach your switch jack.
You are now done with this end of the wire. Your email address will not be published. The easiest way is to use an inexpensive battery interrupter. Then wrap one wire around each of the toy's existing wires. Locate and remove the screws to open the toy.
Screwdriver You'll need the correct sized screwdriver, or in some cases an allen wrench, to open the toy up. Do the same to the second solder pad and continue to connect up the other switches on the circuit. The toy can now be activated by a switch and by the nose. Recently, we have seen more toys where you cannot change the batteries. Step 16: Mine will only do forward and reverse--cannot turn.
Don't burn yourself! Does it move around much? Like a TV remote control or a battery operated clock radio.
January 3, 2019 at 11: Remove the Controller Lid Place all the screw in a spot that won't spill or roll away. When the cover switch is depressed, these internal switches are also pressed and trigger the toy's functions. Many devices in the household are very dangerous and would require a relay to separate the device's electricity from the user pressing the switch.