Confirm Password: When I pulled my first maintenance I pumped alot of grease in all the fittings cause they apparently dont come from the factory with any grease in them.
Tue Aug 27, 2013 8: Email Address: How do I get to the 2 grease jerks on the drive-shaft? Only thing is I couldn't seem to get grease to come out of some of the cups.
Unscrew the standard nipple from the grease gun and put on the 6". Anyone got any ideas how to get the grease to spread through the u-joints better...?? BB code is On.
Yes Lube the front driveshaft and it will help alot. South Okanagan. Were a whole lot faster than you think you are. Old 02-02-2017, 04: Woods Cross Utah.
Tue Aug 27, 2013 5: On one I had to replace the trans coupler and on the other I was able to use the existing couplers. More pics. Latest Posts. I also pulled back the boot on the rear shaft engine side the boot was pretty wrecked and it was pretty rusty in there I used a hypodermic style needle for that I slid it in the gaps in the splines and pumped a shit ton of grease in there.
The top fitting is straight which requires a 90 degree gun end. Lower Navigation.